Sr.
No |
Name
of the examination |
Institute/University |
Year
of passing |
Percentage of marks /CGPA Division |
Specialization |
1 |
B.Tech.
Mechanical |
Institute
of Technology,Nirma University,Ahmedabad |
2009 |
65.3
% |
Mechanical |
2 |
M.
E. Mechanical |
Shri
S’ad vidya mandal Institute of Technology,Bharuch |
2018 |
8.54
(CPI) |
I
C Engine and Automobile |
Sr. No. |
Name
of the organization |
Designation |
Duration |
1 |
K
D Polytechnic , Patan |
Contractual
Lecturer in
Mech. Engg. |
19/11/2009
to 19/06/2010 |
2 |
Tata
Consulting Engineering,Pune |
Assistant
Engineer |
01/07/2010
to 07/05/2011 |
3 |
GEC,
Bharuch |
Assist
Prof. in
Mech. Engg. |
10/05/2011
To till date |
Sr. No. |
Subject/Title |
Duration |
Place |
Year |
1 |
Induction
Phase-I |
13/2/2012 to
24/2/2012 |
NITTTR
Extension Centre, Ahmedabad |
2012 |
2 |
Advances in
Heat Transfer-II nd Level Course |
6/1/2014 to
10/1/2014 |
Parul Institute
of Technplogy,Waghodia |
2014 |
3 |
Environmental
Conservation And Hazard Management |
10/3/2014 to
14/3/2014 |
NITTTR,Bhopal |
2014 |
4 |
Industrial
Safety And Hazard Management |
17/11/2014 to
21/11/2014 |
NITTTR,Bhopal |
2014 |
5 |
Induction
Phase-II |
1/12/2014 to
12/12/2014 |
NITTTR,Bhopal |
2014 |
6 |
Use of blog In
Teaching Learning |
6/6/2016 to
10/6/2016 |
NITTTR,Bhopal |
2016 |
7 |
Pollution
Monitoring and Prevention |
24/7/2017 to
28/7/2017 |
NITTTR,Bhopal |
2017 |
8 |
Advances in
Refrigeration and Air-Conditioning |
8/10/2018 to
12/10/2018 |
LDCE-Ahmedabad |
2018 |
9 |
Recent Trends
in I C Engine |
3/6/2019 to
15/6/20019 |
GEC-Bharuch |
2019 |
10 |
Entrepreneurship |
9/12/2019 to
21/12/2019 |
ADIT-V V Nagar |
2019 |
11 |
Research
Methodology and Technical Writing(RMTW) |
16/9/2019 to
20/9/2019 |
SVNIT-Surat |
2019 |
12 |
Intellectual
Property Rights |
6/7/2020 to
14/9/2020 |
i-Hub,Ahmedabad |
2020 |
13 |
Accreditation
of Undergraduate Engineering Programmes. |
14/9/2020 to
14/12/2020 |
Swayam MOOC |
2020 |
14 |
Elements of FEM |
26/7/2021 to
30/7/2021 |
GEC-Bharuch |
2021 |
Sr. No. |
Subject/Title |
Duration |
Place |
Year |
1. |
ANSYS
Mechanical & ANSYS CFD |
1/7/2020 to
3/7/2020 |
GEC-Bharuch |
2020 |
Sr. No |
Title |
Name of Journal/Conference |
Vol./Year/Page No. |
1 |
Effect of Different Web Openings
in Narrow Flange I Section Beam |
International Journal of
Engineering Research & Technology (IJERT) |
Vol. 2 Issue 11, November - 2013 |
2 |
Part Load Performance Assessment
of Single Shaft Gas Turbine In Cogeneration Cycle Mode |
International Journal of Advance
Research in Engineering, Science & Technology(IJAREST), |
Volume 2,Issue 4, April- 2015 |
3 |
A Review On Design and Numerical
Optimization on Annular Type Combustion Chamber for
Small Gas Turbine Application
With CNG As Fuel |
International Journal of Advanced
in Management, Technology and Engineering Sciences |
Volume 7 Issue 10 2017 |
4 |
Design, CFD analysis and
numerical optimization of diffuser used in annular type combustion
chamber for small gas turbine engine |
International Journal of Advanced
in Management, Technology and Engineering Sciences |
Volume 8, Issue III, MARCH/2018 |
5 |
Study of Stratified Flow in Horizontal Pipe
with CFD |
International Journal of Fluid and Thermal Engineering |
Volume 2 Issue 2, 2016 |
6 |
Design & Development of
Enhanced Utility Box Using Peltier Effect |
International Research Journal of
Modernization in Engineering Technology and Science |
Volume:03/Issue:04/April-2021 |
Sr. No. |
Subject/Title |
Duration |
Year |
1 |
Accreditation
of Undergraduate Engineering Programmes. |
14/9/2020 to
14/12/2020 |
2020 |