Sr. No |
Name of the examination |
Institute/University |
Year of passing |
Specialization |
1 |
B.E.
Mechanical |
The
Maharaja Sayajirao University of Baroda, Vadodara |
2005 |
Mechanical
Engineering |
2 |
M.E.
Mechanical |
The
Maharaja Sayajirao University of Baroda, Vadodara |
2007 |
Jet
Propulsion & Gas Turbine Plants |
3 |
Ph.D. |
Sardar
Vallabhbhai National Institute of Technology, Surat |
Perusing |
Mechanical
Engineering / Thermal Science |
Sr. |
Institute |
Department |
Designation |
Period |
01 |
Sardar
Vallabhbhai Patel Institute of Technology, Vasad, Gujarat |
Aeronautical
Engineering |
Visiting
Lecturer |
June
2006 to July 2007 |
02 |
Shri
S’ad Vidya Mandal Institute of Technology, Bharuch, Gujarat |
Mechanical
Engineering |
Lecturer
(Designated as Assistant Professor as per VIth pay rule) |
July
2007 to May 2011 |
03 |
Government
Engineering College, Bhuj, Gujarat |
Mechanical
Engineering |
Assistant
Professor (GES Class-II) |
May
2011 to June 2015 |
04 |
Government
Engineering College, Bharuch, Gujarat |
Mechanical
Engineering |
Assistant
Professor (GES Class-II) |
June
2015 to till date |
Institute Level:
1. Modi, A.J., N.A. Kalel, and
M.K. Rathod, "Thermal performance augmentation of fin-and-tube heat
exchanger using rectangular winglet vortex generators having circular punched
holes". International Journal of Heat and Mass Transfer, 2020. 158: p.
119724.
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119724.
2. Modi, A.J. and
M.K. Rathod, "Comparative study of heat transfer enhancement and pressure
drop for fin-and-circular tube compact heat exchangers with sinusoidal wavy and
elliptical curved rectangular winglet vortex generator". International
Journal of Heat and Mass Transfer, 2019. 141: p. 310-326.
DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.088.
3. Modi, A. and D.
Gosai, "Experimental study on thermal barrier coated diesel engine
performance with blends of diesel and palm biodiesel". SAE International
Journal of Fuels Lubricants, 2010. 3(2): p. 246-259.
DOI: https://doi.org/10.4271/2010-01-1519.
1. A. J. Modi, D. C.
Gosai, and C. M. Solanki, "Experimental Study of Effect of EGR Rates on
NOx and Smoke Emission of LHR Diesel Engine Fueled with Blends of Diesel and
Neem Biodiesel," Journal of The Institution of Engineers (India):
Series C, vol. 99, pp. 181-195, 2018.
2. A. J. Modi and D.
Patel, "Experimental study on LHR diesel engine performance with blends of
diesel and neem biodiesel," SAE Technical Paper 0148-7191, 2015.
3. A. J. Modi,
"Experimental study of energy balance in thermal barrier coated diesel
engine," SAE Technical Paper 0148-7191, 2012.
1. V. U. Patel and A.
J. Modi, "Analysis of Microchannel Heat Sink Using CFD,"
International Journal of Engineering sciences & Research Technology vol. 4,
pp. 334-342, 2015.
2. B. Gupta and A. J.
Modi, "Review of Automotive Brake Friction Materials," International
Journal of Advance Engineering and Research Development, vol. 2, pp. 218-223,
2015.
3. S. Sarkar, P. P.
Rathod, and A. Modi, "Research Paper on Modeling and Simulation of Disc
Brake to Analyse Temperature Distribution using FEA," International
Journal for Scientific Research & Development, vol. 2, 2014.
4. D. Patel and A. J.
Modi, "Review Paper on Experimental Investigation on Combined Effect of
Thermal Barrier Coating and of Thermal Barrier Coating and Blending on
Stationary Four Stroke CI Engine Performance and Emission Characteristics
Performance and Emission Characteristics," International Journal of
Research in Engineering & Advanced Technology, vol. 2, pp. 1-5, 2014.
5. H. Rathod and A.
J. Modi, "Computational Analysis of Heat Transfer Through FOur Stroke SI
Engine Fins," International Journal of Science Research and Development,
vol. 1, 2013.
6. H. Rathod and A.
J. Modi, "Effect of Different Variables on Heat Transfer Rate of Four
Stroke SI Engine Fins - Review Study," International Journal of Mechanical
Engineering and Technology, vol. 4, pp. 328-333, 2013.
7. P. B and A. J.
Modi, "CFD Analysis of CI Engine Cooling Water Pump of Car,"
International Journal of Science Research and Development, vol. 1, 2013.
8. P. B and A. J.
Modi, "Analysis of Engine Cooling Water Pump of Car & Significance of
its Geometry," International Journal of Mechanical Engineering and
Technology, vol. 4, pp. 100-107, 2013.
9. V. Patel and A.
Modi, "Optimization of heat sink analysis for electronics cooling,"
World Journal of Science and Technology, vol. 2, pp. 64-69, 2012.
10. A. J.Modi and P. Kevadia, "Experimental Study of effect of EGR Rates on NOx and Smoke Emission of TBC Diesel Engine Fuelled with Blends of Diesel and Jatropha Biodiesel," Thermal Fluid and Manufacturing Science, pp. 262-268, 2012.
11. P. Kevadiya and A. J. Modi, "Experimental Study on Emission
Performance of Diesel Engine Fuelled with Blends of Diesel and Jatropha
Biodiesel," Thermal Fluid and Manufacturing Science, 2012, vol. 1, pp.
255-261, 2012.
12. A. J. Modi and D. C. Gosai, "Experimental Analysis of Performance of
Thermal Barrier Coated (TBC) Diesel Engine," International Journal of
Advances in Thermal Science and Engineering, vol. 1, pp. 17-25, 2010.
1. Modi A. J., Lalit
Patil and M. K. Rathod, “Numerical Investigation for Thermo-Fluid Analysis on
Tube Finned Heat Exchanger using Vortex Generator”, presented at International
Conference on Recent Advances in Mechanical Infrastructure, 20-21 April, 2019,
IITRAM, Ahmedabad.
2. Modi A. J. and C.
S. Jadav, "Structural Analysis of Different Geometry Heads for Pressure
Vessel using ANSYS Multiphysics," in 5th International Conference
on Advances in Mechanical Engineering (ICAME - 2011), 2011.
3. Modi A. J.and D.
C. Gosai, "Fatigue Analysis of Wind Turbine Blade using FE analysis,"
in 5th International Conference on Advances in Mechanical Engineering
(ICAME - 2011), 2011.
4. R. Patel, K. K.
Araniya, and A. J. Modi, "Determination of Distribution of in the mass
flow rate of the coolant flowing inside each tube by means of an indirect
method, in a water-to-air, tube finned type, triangular pitched, cross flow
heat exchanger," in 4th International Conference on Advances in
Mechanical Engineering (ICAME - 2010), 2010.
5. Modi A. J.and D.
C. Gosai, "Biodiesel : The Alternate of Petroleum Diesel," in 3rd
Internationa Symposium on Renewable Energy for Rural Devlopment (ISORE - 2010),
2010.
6. Modi A. J.and D.
Gosai, "Experimental analysis of performance of bio-fuels (Jatropha &
palm bio-diesel) on thermal barrier coated (TBC) diesel engine," in 3rd
International conference of Advances in Mechanical Engineering (ICAME-2010),
2010.
7. V. Y. Gajjar and
A. J. Modi, "Stress analysis of a Twin tube type of an automobile shock
absorber using ANSYS®," in 4th International Conference on
Advances in Mechanical Engineering (ICAME - 2010), 2010.
8. Modi A. J., M. Rathod, and P. Prabhakaran, "Experimental studies on Thermal Performance of a Tube-FIn Type of Automobile Radiator," in National Conference on Advances in Fluid Flow and Thermal Sciences (AFFTS - 2008), 2008
(PG Student Guided)
(I) Research Guidance
Sr. No. |
Undergoing
Number Enrolled Students |
Thesis
Submitted |
Degree
Awarded |
PG / M. E. (Mechanical) or
Equivalent |
- |
-- |
13 |
E. (II)
Details of PG Student Guided
Sr. No. |
Title |
Student
Name (Course) |
University
/ College |
Year |
Whether
you are Guide/ Co-Guide/mentor |
Status |
01 |
Determination
of Mass Flow Distribution of The Coolant Flowing inside tube by Indirect
method, in a water-to-air, tube finned type, triangular pitched, Heat
Exchanger |
K.K.
Araniya (M.E.) |
The
M. S. University of Baroda, Vadodara Faculty
of Engineering and Technology |
2010 |
Co-Guide |
Complete |
02 |
Experimental
Study of Effect of EGR Rates on NOx and Smoke Emission of TBC
Diesel Engine Fuelled with Blends of Diesel and Jatropha Biodiesel |
P.B.
Kevadiya (M.E.) |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2012 |
Guide |
Complete |
03 |
CFD
Analysis of Automobile Catalytic Convertor |
Jigar
K. Patel (M.E.) |
Gujarat
Technological University, Ahmedabad Shri
S. V. M. Institute of Technology, Bharuch |
2013 |
Guide |
Complete |
04 |
CFD
Analysis of Heat Sink |
Patel
Vinod U. (M.E.) |
Gujarat
Technological University, Ahmedabad Shri
S. V. M. Institute of Technology, Bharuch |
2013 |
Guide |
Complete |
05 |
Study and Performance Analysis of Scramjet
Engine |
Bhoya Y.M. (M.E.) |
Gujarat
Technological University, Ahmedabad Shri
S. V. M. Institute of Technology, Bharuch |
2013 |
Guide |
Complete |
06 |
Analysis
of Fins in Four Stroke Petrol Ignition Engine of Varying Cross Section Using
CFD |
Rathod
Hardik D. (M.E.) |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2013 |
Guide |
Complete |
07 |
Computational
Fluid Dynamic (CFD) Analysis of Water Pump used in SI Engine and CI Engine |
Patel
Bhavik M. (M.E.) |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2013 |
Guide |
Complete |
08 |
An
Empirical Study of Quality Management Practices in The Manufacturing Industry
of India |
Bharat
G. Patel (M.B.A.) |
Indira
Gandhi National Open University, New Delhi School
of Management Studies |
2013 |
Guide |
Complete |
09 |
Thermal
Analysis of Ventilated Disc Brake by Varying Design Parameter |
Subhashish
Sarkar (M.E.) |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2014 |
Co-Guide |
Complete |
10 |
Experimental
Investigation of Performance & Emission Analysis of Diesel Engine using
Diesel and Butanol Blend |
Neeraj
Shingala (M.E.) |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2014 |
Guide |
Complete |
11 |
Experimental Investigation on Combined Effect
of Thermal Barrier Coating and Blending on Stationary Four Stroke CI Engine
Performance and Emission Characteristics |
Dhiren
Patel (M.E.) |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2014 |
Guide |
Complete |
12 |
Analysis and Optimization of Connecting Rod |
SONI RAJ BHARATBHAI (M.E.) 130850708014 |
Gujarat
Technological University, Ahmedabad HJD Institute of Technical
Education and Research, Kera, Kutch |
2015 |
Guide |
Complete |
13 |
Experimental Investigation of friction
performance of automobile brake using different materials namely Alumina and
Titanium |
Brijendra
Gupta (M.E.) 130150735001 |
Gujarat
Technological University, Ahmedabad Government
Engineering College, Bhuj |
2015 |
Guide |
Complete |
1. Fin-and-tube heat exchanger with trapezoidal notch type vortex generator, Application No. 343882-001, Filing date: 26-05-2021, Class: 23-03-Heating Equipment, Journal No: 27/2021, Journal date: 02-07-2021. (Published)
2. Automobile Radiator with Vortex Generator, Application No. 342547-001, Filing date: 20-04-2021 (Under Review).
1. Life Member - Indian Society for Technical Education, New Delhi - LM57347
Attended Short Term Training Program (STTP) :
Sr. No. | Title of the Training Programme | Duration | Week | Organizer
|
01 | Advance Engineering Optimizations Through Intelligent Techniques | 16th-20th June, 2008 | 1 | Dept. of Mech. Engg., SVNIT, Surat |
02 | Recent Trends in CAE 2008 | 30th June – 4thJuly, 2008 | 1 | Dept. of Mech. Engg., SVNIT, Surat |
03 | Computational Fluid Dynamics – Basics and Applications | 7th-11th July, 2008 | 1 | Dept. of Mech. Engg., SVNIT, Surat |
04 | Advances in Heat Transfer in Mechanical Engineering | 17th-21stNovember, 2008 | 1 | Dept. of Mech. Engg., PIET, Limda, Vadodara |
05 | Wind Energy | 19th-23rdJanuary, 2009 | 1 | Dept. of Civil, App. Mechanics & Mech. Engg., SVNIT, Surat |
06 | Energy Conservation, Management And Audit | 21st-25thDecember, 2009 | 1 | Dept. of Mech. Engg., SVNIT, Surat |
07 | Part A: Finite Element Analysis – Introduction Part B: Advance Finite Element Analysis | 9th-13th June, 2010 | 1 | Anchor Institute Cell, SVNIT, Surat in Association with ASME, New York, USA |
08 | Induction Training Phase-1 | 19th-30thAugust, 2013 | 2 | NITTTR, Bhopal at NITTTR Ext. Center, Ahmedabad |
09 | Importance of CAD/CAM | 18th-22ndNovember, 2013 | 1 | Dept. of Mech. Engg., L.D.College of Engg., Ahmedabad |
10 | Karmayogi Residential Training for Quality Improvement Program in Technical Education | 6th – 8th March, 2014 | 3 Day | Commissioner, Technical Education, Education Department, Govt. of Gujarat |
14 | Advances in Automobile Engineering | 4th -8th August, 2014 | 1 | NITTTR Bhopal |
15 | An Engineering Approach to Computational Fluid Dynamics | 15th -19th December, 2014 | 1 | SVIT, Vasad |
16 | Understanding Industrial Process, Control, Methodology and Machinery | 8th-12th June, 2015 | 1 | GEC, Bhuj |
17 | OPTIMIZATION: Theory and Practice (OptiTEP-2015) | 7th-19thDecember, 2015 | 2 | VGEC, Chandkheda, Ahmedabad |
18 | Fundamentals of Matlab | 11th-15th July, 2016 | 1 | SVNIT, Surat |
Sr. No. | Title of the Training Programme | Duration | Week | Organizer
|
01 | Online Training Course: 1.01x: Energy 101 | 16th Sept - 4thDec, 2013 | 10
| EDX & The University of Texas System, USA |
02 | Online Training Course:Energy 101 | 13th Jan – 11thMarch, 2014 | 8 | Coursera & The Georgia Institute of Technology, USA |
03 | Online Training Course: Introduction to Thermodynamics | 3rd Feb-29thMarch, 2014 | 8 | Coursera & The University of Michigan, USA |
04 | Online Training Course: Modelling and Simulation using MATLAB | 22nd April 2014 to 30thAugust, 2014 | 17 | IVERSITY.ORG, INSTRUCTOR: Prof. Dr.-Ing. Georg Fries, Prof. Dr. Peter Dannenmann, Prof. Dr. Karin Graeslund, Prof. Dr.Ing.,Patrick Metzler, Prof. Dr. Michael Schmidt, Prof. Dr. Andreas Zinnen, and Dipl.-Päd. Robert Hörhammer. |
05 | Online Training Course: Vehicle Dynamics I: Accelerating and Braking
| 15th April 2014 to 21st July, 2014
| 12 | IVERSITY.ORG, INSTRUCTOR: Univ.-Prof. Dr.-Ing. Martin Meywerk, The Inst. of Automotive and Powertrain Eng. (IFAS) is part of the Faculty of Mech. Eng. (FME) at the Helmut-Schmidt-Univ., Univ. of Federal Armed Forces, Germany |
Workshop attended :
Sr. No. | Title of the Training Programme | Duration | Days | Organizer
|
01 | Advances in Compact and Micro Heat Exchangers for Sustainable Development | 7th-8th January, 2008 | 02 | IIT, Delhi |
02 | Research and Publication | 24th April, 2009 | 01 | A. D. Patel Inst. Of Technology, New V.V. Nagar |
03 | Partial Differential Equations and Their Applications | 27th-28thAugust, 2011 | 02 | SVNIT, Surat |
Sr. No. |
Title/Subject of MOOC Training Taken |
Duration of
Training |
|
From |
To |
||
1. |
Accreditation of Undergraduate Engineering
Programmes. |
14.09.2020 |
14.12.2020 |
PROF ASHISHKUMAR JASHVANTLAL MODI